Our stud cutters just got a serious upgrade! Now featuring our exclusive Stud Stacker holder so you can find exactly which cutter you are looking for and store them on your Ikea Skadis pegboard using minimal space!
You will receive a set of 12 cutters supplied with holder (some reflective pairs). Pegs available separately and one peg holds 5 stud stacker sets.
My best selling stud cutter collections are now available for use with Precious Metal Clay! These have a much deeper embossing element which allows you to use with a clay thickness of approximately 1mm-1.2mm to cut down on materials costs.
*Approximate size of items before firing (this does not include shrinkage)*
Eyeball: 12x7mm
Owl: 11x8mm
Potion: 12x8mm
Spell Book: 10x7mm
Witches Boots (reflecting pair): 12x9mm
Witches Cat (reflecting pair): 12x7mm
Witches Cauldron (reflecting pair): 11x8mm
Witches Hat (reflecting pair): 13x9mm
*How to use*
1) Roll out your PMC to a thickness of 1mm-1.2mm ~ you may need to use guides for an even thickness.
2) Gently press the cutter into the clay and pull straight up. If your clay is too sticky you might need to consider using a release agent or allow the rolled out clay to firm up a little before using your cutter. You can also use clingfilm over the top of your clay when you cut to give a more 3D/puffy effect to your pieces.
3) Remove any excess clay from around the cut out shape and allow the pieces to dry out. Sand to remove any rough edges once dry.
4) Fire and polish your metal clay pieces as usual
*Care*
Clean with warm soapy water, isopropyl alcohol or baby wipes.
Do not expose to heat or sun.
Do not expose to harsh chemicals that can melt the PLA
Do not use in the dishwasher.
Please note that 3D printed cutters can occasionally have tiny imperfections where the nozzle lifts away from the cutter on its final layer and where the "seams" are. This is normal and to be expected of 3D printed cutters
My cutters are fully designed, printed and tested by myself to ensure the best quality possible.
Please note some of the pictures are shown using polymer clay of the same thickness for illustration purposes.
Please follow my social media @sunshinecutters for updates and new product releases.
Thank you for supporting my small business.
Helena xx
