My own range of cutters specifically designed for use with polymer clay but also suitable for precious metal clay and ceramics. Please note these are not classed as food safe.
 
These now feature my exclusive  "Hook Lock" system for easy storage on Skadis compatible peg boards. This is also great for keeping cutter sets together. 
 
You will receive the cutter sets you choose from the drop down list including an appropriate sized hook lock fastener. Single cutters will still receive a hook lock fastener, however peg board pegs are not included but can be purchased separately. 

 
*Approx sizes of finished items*
 
LOVE & XOXO Dangles: 30mm tall
 
*Features*
 
Super sharp 0.4mm cutting blade.
Strong wall with extra cutting blade support design for prolonged use.
Sturdy base with rounded edges for comfort when in use.
Connecting tabs for my exclusive "hook lock" system for easy storage.
Made from PLA - a plant based, biodegradable material.
Most items printed and ready to go with fast shipping!
 
* How to use*
 
1) Roll clay out to approximately 2.5-3mm thick (setting 2-3 on most pasta machines) and then roll it onto your cutting tile so it is well adhered.
 
2) Dip cutting side of cutter into a damp soapy sponge a couple of times (you can also dust the clay with cornflower for the same effect).
 
3) Press the cutter down firmly then pull straight up.  You can also use the "double cut" method where you press the cutter in a little way, pull it off, then cut again over the top.
 
4) Bake your pieces and decorate as you wish. Cut onto the same tile you bake with to avoid distorting tricky shapes.
 
*Care*
 
Clean with lukewarm soapy water, isopropyl alcohol or baby wipes.
Do not expose to heat or sun.
Do not expose to harsh chemicals that can melt the PLA
Do not use in the dishwasher.
Pictures show my own work using Fimo Soft Clay.
 
*Pricing*
 
I try and keep my prices as low as possible to provide great value for money.
Each cutter is priced individually depending on the time it takes to print and the amount of material used. Therefore more heavily embossed/intricate cutters will cost more than the simpler designs as they take much longer to print. 
 
Please note that 3D printed cutters can occasionally have tiny imperfections where the nozzle lifts away from the cutter on its final layer and where the "seams" are. This is normal and to be expected of 3D printed cutters
 
My cutters are fully designed, printed and tested by myself to ensure the best quality possible.
Thank you for supporting my small business.
 
Helena xx
 
*INTERNATIONAL CUSTOMERS*
 
Unfortunately due to new product legislation laws, tariffs and an increase in parcels being returned to sender due to incorrect addresses it is no longer viable for my small business to ship to international destinations. I apologise for any inconvenience this may cause. Thankyou for your understanding on this matter.