*Approximate size of finished Item*
Acorn: 11.5x9mm
Coffee Cup: 8.5x12mm
Fox: 10x10mm
Hedgehog (reflecting pair): 8.5x11.5mm
Jam: 10.5x8mm
Sweater: 11x9mm
Leaf: 12x7.5mm
Maple Leaf: 9.5x10mm
Pine Cone: 10x7.5mm
Squirrel (reflecting pair): 11.5x9.5mm
Toadstool: 10.5x10mm
Wellies (reflecting pair): 11x9.5mm
My own range of cutters specifically designed for making stud earrings with polymer clay but also suitable for precious metal clay and ceramics. Please note these are not classed as food safe.
*Features*
- Super sharp 0.4mm cutting blade that creates precise cuts and a professional finish every time.
- For use with clay 2.5-3mm thick (setting 2 on most pasta machines).
- Strong wall with extra cutting blade support design for prolonged use.
- Sturdy base with rounded edges for comfort when in use.
- All designs will work with a 4mm stud post
Please note that 3D printed cutters can occasionally have tiny imperfections where the nozzle lifts away from the cutter on its final layer and where the "seams" are. This is normal and to be expected of 3D printed cutters
My cutters are fully designed, printed and tested by myself to ensure the best quality possible.
Please follow my social media @sunshinecutters for updates and new product releases
Thank you for supporting my small business.
Helena xx
Stud Cutters - Autumn 2024
1) Roll clay out to approximately 2.5-3mm thick (1st/2nd thickest setting on most pasta machines) and then roll it onto your cutting tile so it is well adhered.
2) Dip the cutting side of the cutter into a damp soapy sponge a couple of times (you can also dust the clay with cornflower for the same effect).
3) Press the cutter down firmly then pull straight up. You can also use the "double cut" method where you press the cutter in a little way, pull it off, then cut again over the top.
4) Bake your pieces and decorate as you wish. Cut onto the same tile you bake with to avoid distorting tricky shapes.
