My own range of cutters specifically designed for use with polymer clay but also suitable for precious metal clay and ceramics. Please note these are not classed as food safe.

*Approx sizes of finished items*

35x28mm at widest points

*Features*

Super sharp 0.4mm cutting blade.
Strong wall with extra cutting blade support design for prolonged use.
Sturdy base with rounded edges for comfort when in use.
Made from PLA - a plant based, biodegradable material.
Most items printed and ready to go with fast shipping!

* How to use*

1) Roll clay out to approximately 2mm thick (1st/2nd thickest setting on most pasta machines) and then roll it onto your cutting tile so it is well adhered.
2) Dip cutting side of cutter into a damp soapy sponge a couple of times (you can also dust the clay with cornflower for the same effect).
3) Press the cutter down firmly then pull straight up. You can also use the "double cut" method where you press the cutter in a little way, pull it off, then cut again over the top.
4) Bake your pieces and decorate as you wish. Cut onto the same tile you bake with to avoid distorting tricky shapes.

*Care*

Clean with lukewarm soapy water, isopropyl alcohol or baby wipes.
Do not expose to heat or sun.
Do not expose to harsh chemicals that can melt the PLA
Do not use in the dishwasher.
Pictures show my own work using Fimo Soft Clay.
Please note that 3D printed cutters can occasionally have tiny imperfections where the nozzle lifts away from the cutter on its final layer and where the "seams" are. This is normal and to be expected of 3D printed cutters

My cutters are fully designed, printed and tested by myself to ensure the best quality possible.

Thank you for supporting my small business.

Helena xx

*INTERNATIONAL CUSTOMERS*

Unfortunately due to new product legislation laws, tariffs and an increase in parcels being returned to sender due to incorrect addresses it is no longer viable for my small business to ship to international destinations. I apologise for any inconvenience this may cause. Thankyou for your understanding on this matter.

Remembrance Day Collection - Open Poppy

£3.99

Quantity

Items are usually in stock and ready to ship within 1-2 days but please allow 3-4 days if we are experiencing a high demand for these items.

We aim to ship using first class post for total order values less than £10.00 and Tracked 48 for any value higher than £10.00. The tracking number will be provided upon dispatch if your parcel has been sent using a tracked service.

International orders are welcomed although these will always be sent using a tracked service regardless of the value. Please be patient for your items to arrive as they can often take a couple of week or longer to get through customs.

Please respect that we aim to use as few non recyclable materials as possible so your items will usually come shipped loose in a box or padded bag.

If you are not 100% satisfied with your physical items you are more than welcome to return them provided they have not been used and are in the original condition they were sent in. The Customer is responsble for any return costs. Digital items are strictly non refundable.

If you have any problems at all please contact us and we will find a solution right away.
Please clean your cutters using isopropyl alcohol, baby wipes or tepid (not warm or hot) soapy water.

Do not use any harsh chemicals such as acetone as this will melt the cutter.

Be sure not to be rough with your cutters - they have a very sharp thin cutting blade that do not require any force to cut through the clay.

Avoid excess sideways pressure on your cutters that will cause them to flex as this could damage the cutting blade and shorten the "life" of your cutter.
1) Make sure your clay is fully conditioned before use - there are many You-tube videos describing this if you are new to using polymer clay.

2) If possible use a pasta machine to roll out your clay to the desired thickness. You can also use an acrylic roller. Check the thickness is correct as it varies with each cutter, especially the ones with embossed features. These will not work correctly if the clay is too thin or thick.

3) Apply your clay to a ceramic tile or smooth glass surface. Prepare a small dish or ramekin with a small sponge inside dampened with water and a drop of liquid hand soap. This doesn't want to be swimming in water - just enough to moisten the cutter.

4) Splodge the cutting blade side down onto your damp sponge a couple of times and then press the cutter into the clay. This does not require much force so just be gentle - you should feel when it has cut through (you can also use cornflower dusted onto the clay for this step if you prefer).

5) Use a tissue blade to release the clay from the tile and gently run your finger over any ragged edges before baking. This saves loads of sanding time in the long run!

6) Bake your clay and finish your items as normal.

FREE SHIPPING WHEN YOU SPEND OVER £20.00! (UK only)

🌻3D Printed Polymer Clay Cutters Designed and Manufactured by a Small Business in the UK🌻

🌻3D Printed Clay Cutters & Accessories Designed and Manufactured by a Small Business in the UK🌻

Remembrance Day Collection - Open Poppy

Shipping Information

Cutter Cleaning & Care

Using your Cutters

Pricing