*Approximate size of finished Item*
Arch: 9x10mm
Flower: 11m
Frame: 11x8mm
Heart: 10mm
Hexagon: 10mm
Marquise: 12x7mm
Oval: 11x8mm
Pillow: 10mm
Rectangle: 11x8mm
Round: 10mm
Shield: 10x11mm
Square: 9mm
Star: 11mm
Triangle: 10mm
My own range of cutters specifically designed for making stud earrings with polymer clay but also suitable for precious metal clay and ceramics. Please note these are not classed as food safe.
*Features*
- Super sharp 0.4mm cutting blade that creates precise cuts and a professional finish every time.
- For use with clay 2.5-3mm thick (setting 2 on most pasta machines).
- Strong wall with extra cutting blade support design for prolonged use.
- Sturdy base with rounded edges for comfort when in use.
- All designs will work with a 4mm stud post
Please note that 3D printed cutters can occasionally have tiny imperfections where the nozzle lifts away from the cutter on its final layer and where the "seams" are. This is normal and to be expected of 3D printed cutters
My cutters are fully designed, printed and tested by myself to ensure the best quality possible.
Please follow my social media @sunshinecutters for updates and new product releases
Thank you for supporting my small business.
Helena xx
Stud Cutters - Simple Shapes
1) Roll clay out to approximately 2.5-3mm thick (1st/2nd thickest setting on most pasta machines) and then roll it onto your cutting tile so it is well adhered.
2) Dip the cutting side of the cutter into a damp soapy sponge a couple of times (you can also dust the clay with cornflower for the same effect).
3) Press the cutter down firmly then pull straight up. You can also use the "double cut" method where you press the cutter in a little way, pull it off, then cut again over the top.
4) Bake your pieces and decorate as you wish. Cut onto the same tile you bake with to avoid distorting tricky shapes.
